Flexible, Extendable and Centralized Power Distribution
PLANET FSD-1008HP provides eight 10/100TX ports featuring 30-watt 802.3at PoE+, a total 120-watt PoE budget and extra two uplink ports to fulfill the demand of sufficient PoE power for HD IP surveillance and Wi-Fi system in a small-scale but high-performance network. With the same desktop-sized and compact metal housing, it makes the placement of the unit convenient and provides a quick and easy PoE PDs deployment with power feeding.
Ethernet Data Transmit Distance Extension
The built-in solid DIP switch provides "Standard", "VLAN" and "Extend" operation modes. The FSD-1008HP operates as a normal IEEE 802.3at PoE+ switch in the "Standard" operation mode.
The "VLAN" operation mode features with port-based VLAN function that helps to prevent the IP camera’s multicast or broadcast storm from influencing each other.
In the "Extend" operation mode, the FSD-1008HP operates on a per-port basis at 10Mbps duplex operation but supports 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FSD-1008HP provides an additional solution for 802.3at PoE+ distance extension, thus saving the cost of Ethernet cable installation. Furthermore, its VLAN isolation function isolates each port so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode.
Environment-friendly, Fanless Design for Silent Operation
The FSD-1008HP comes with a desktop-sized, compact metal housing, making the placement of the unit convenient. It features a ventilated construction in which a cooling fan is not necessary, thereby making its operation noiseless. Moreover, the FSD-1008HP is able to operate reliably and stably in any environment without affecting its performance. The deployment of PoE PDs with constant power feeding can be easily and quickly done.
Easy Cable Connection
With data and Power over Ethernet from one unit, the FSD-1008HP reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. With 8 PoE interfaces, the FSD-1008HP is ideal for small businesses and workgroups requiring the deployment of the PoE facility including wireless access points, IP-based surveillance camera and IP phones in any places with ease, efficiency and cost-effectiveness.
Different Networks Managed by One Control Center
Providing eight 802.3at PoE+ in-line power interfaces, the FSD-1008HP can easily build a power source that centrally controls the enterprises’ IP phone systems, IP camera systems and wireless AP systems. For instance, up to 8 cameras can be installed around the corner in the company for surveillance demands or up to 8 wireless APs can be built to have a wireless roaming environment in the office. Without the power-socket limitation, the FSD-1008HP makes the installation of cameras or wireless APs easier and more efficient.
Power over Ethernet
|Copper Port||10 10/100BASE-TX MDI/MDIX Ports|
|PoE Injector Port||8-port with 802.3at/af PoE injector function with Port-1 to Port-8|
|Switch Throughput@64 bytes||1.48Mpps@64 bytes|
|MAC Address Table||8K entries, automatic source address learning and aging|
|Maximum Frame Size||1522 bytes|
|Flow Control||IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
10/100BASE-TX RJ45 interfaces:
|DIP Switch||Selectable operation mode
|Dimensions (W x D x H)||220 x 150 x 43 mm (1U height)|
|Power Requirements||AC 100~240V, 50/60Hz, 2.5A max.|
|Power Consumption/ Dissipation||System On: Max. 2.4 watts/8.1 BTU
Ethernet Full Loading: Max. 5 watts/10.2 BTU
PoE Full Loading: Max. 129 watts/440.1 BTU
|ESD Protection||Contact discharge of 4KV DC
Air discharge of 6KV DC
|Power over Ethernet|
|PoE Standard||IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
|PoE Power Supply Type||End-span|
|PoE Power Output||Per port 55V DC, 540mA. max. 30 watts|
|Power Pin Assignment||1/2(+), 3/6(-)|
|PoE Power Budget||120 watts|
|Max. Number of Class 2 PDs||8|
|Max. Number of Class 3 PDs||8|
|Max. Number of Class 4 PDs||4|
|Regulatory Compliance||FCC Part 15 Class A, CE|
|Standards Compliance||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet (EEE)
|Operating||Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
|Storage||Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
|GSD-1008HP||Настольный коммутатор 8-портов 10/100/1000T 802.3at PoE + 2-порта 10/100/1000T (120 ватт)|
|FGSD-1011HP||8-Port 10/100TX 802.3at PoE + 1-Port 10/100/1000T + 1-Port 100/1000X SFP Desktop Switch (120 watts)|
|ICA-E6260||2 Mega-pixel PoE Plus Speed Dome IP Camera with Extended Support|
|ICF-1800||HD Touch Screen Android Multimedia Conferencing Phone|
|WDAP-1750AC||1750Mbps 802.11ac Dual Band Wall Mount Enterprise Wireless Access Point|
|WDAP-C1750||1750Mbps 802.11ac Dual Band Ceiling-mount Enterprise Wireless Access Point|
|Информация для заказа|
|Настольный коммутатор 8-портов 10/100TX 802.3at PoE + 2-порта 10/100TX (120 ватт)|