RS-232 / RS-422 / RS-485 Медиаконвертеры последовательного интерфейса
» ICS-102 / ICS-102S15 / ICS-105A
» Купить в официальном интернет-магазине
Cost-effective Solution for RS-232 / RS-422 / RS-485 to Ethernet Application
Медиаконвертеры последовательного интерфейса PLANET ICS-10x series Media Converter / Device Server can convert Serial RS-232 / RS-422 / RS-485 communication interface over Fast Ethernet networking. There are SC type and LC type connectors, and single-mode/multi-mode media for customers needs. Ethernet signal allows the two types of segments to connect easily, efficiently and inexpensively. The ICS-10x converter can be used as a stand-alone unit or as a slide-in module to PLANET Media Converter Chassis (MC-700 and MC-1500). It greatly saves time and expense for users and SIs without the need of replacing the existing serial equipment and software system.
Extending Distance
Медиаконвертеры последовательного интерфейса ICS-10x extends the distance of deploying serial equipment and hosts. The selectable fiber-optic wires on the basis of distance are provided. Therefore, this product will perfectly satisfy the diverse demands while providing reliable and efficient network solutions based on the distance and budgets of installation.
Remote Manageable
Медиаконвертеры последовательного интерфейса ICS-10x enables the serial equipment to be connected via IP-based transmission. It also makes them able to connect to a TCP / IP networking immediately. The ICS-10x Web Smart media converter provides management through Web Interface. It supports application mode and serial operation mode, connecting alarm, IP address, etc. It helps the network administrators to reduce the amount of valuable time spending on detecting and locating network problems; otherwise, it requires visual inspection of cabling and equipment. For large networking environment, multiple connection options are available with the ICS-10x as well.
Access Control System – Traditional Installation
Most of the enterprises and governments use access control plate and Mifare or RFID to authorize entrance identity. With traditional deployment, access control machines use the RS-232 or RS-485 serial interface and cables connecting to login server. With connection with the ICS-10x Serial over Fast Ethernet Converter, the access control machine is able to be extended over longer distances via fiber optical interface. The distance can be up to 20km in a local range. The ICS-10x can also be linked to an XDSL router to get the Internet access capability; then the access control can be set and monitored over the Internet.
Process Control
The PLC (Programmable Logical Control) is required to monitor, configure and manage the Robot conveyer including other machines in the manufacturing process. The ICS-10x can be set to TCP server mode and connect with the PLC. Therefore, the administrator can remotely configure and set command settings through Fast Ethernet intranet to control the PLC, the administrators and workstations. There is no need for the administrators to be always by the side of the I/O machine.
RTU Data Collect – UDP Mode
The RTU (Remote Terminal Unit) may be applied to collect and monitor the data of waves, signal and power utilization. Connecting the RTU with the ICS-10x in UDP mode, the data can be sent over Fast Ethernet to local server or over Internet to remote server automatically.
Surveillance Motion Control – Pair Connection Mode
Using pair connection along with the fiber optic patch cord, the ICS-10x extends the remote central surveillance monitoring with the control keyboard/joystick via RS-232 / RS-422 / RS-485 interfaces.
| Дата | Версия | Описание | Загрузка |
|---|---|---|---|
| 2018-06-14 | 1.0 | ICS-102_102S15_105A |
|
| Дата | Версия | Описание | Загрузка |
|---|---|---|---|
| 2017-08-11 | 1.91b170609 | Fixed DHCP Client issue. |
|
| 2015-10-16 | 1.9b151007 | Improved serial compatibility. |
|
| 2012-12-28 | 1.8b121009 | Bug Fixed - DHCP Enable, the system will recheck after every 10 seconds. |
|
| 2011-10-15 | 1.7b110927 | 1) Fix the catch CSS issue when clear cookie. 2) Fix the Client reply signal loss 3) Change Inactive Timeout to be "Second" |
|
| 2010-11-05 | 1.6b101022 | Bug Fixed 1.Fix the change IP address issue. 2.Fix the UDP client mode issue. 3.Fix the software reset default that IP address can not become to default IP address. |
|
| 2009-02-25 | 1.3b090114 | Version 1.3b Firmware |
|
| 2008-12-05 | 1.2b081009A | Version 1.2b Firmware |
|
| 2008-12-01 | 1.1a080611 | Version 1.1a Firmware |
|
| Дата | Версия | Описание | Загрузка |
|---|---|---|---|
| 2009-07-15 | 1.1 | Quick Install Guide |
|
| 2008-05-19 | 1.0 | Quick Install Guide for ICS-100/102/102S15 |
|
| Дата | Версия | Описание | Загрузка |
|---|---|---|---|
| 2012-04-27 | 1.5 | Add ICS-105A. |
|
| 2009-07-15 | 1.3 | User's Manual |
|
| 2009-04-20 | 1.2 | User's Manual |
|
| 2008-04-15 | 1.1 | User's Manual |
|
| Дата | Версия | Описание | Загрузка |
|---|---|---|---|
| 2013-11-29 | 3.6.3<br>(Virtual COM) | Windows Base Only: 1. Improves the stability for RS232/422/485 2. Supports Win7/Win2008: Win8/Win2012 (Must install latest version of WinPcap) |
|
| 2009-03-02 | 3.1 | Utility release |
|
| Дата | Версия | Описание | Загрузка |
|---|---|---|---|
| 2008-06-24 | 1.0 | Initial Release |
|
