Ultra-high-speed, Enterprise Wireless LAN Solution
To meet enterprise demand for wireless communication, PLANET WDAP-C7200E 1200Mbps Dual Band 802.11ac Wireless AP supports central management through PLANET AP controllers. With IEEE 802.11ac 2T2R dual-band technology, the WDAP-C7200E provides a maximum wireless speed of 867Mbps at 5GHz and 300Mbps at 2.4GHz.
Powerful Dual-band WLAN Solution
PLANET WDAP-C7200E, adopting the IEEE 802.11ac standard, provides a high-speed transmission of power and data, meaning two remote nodes in the 5GHz frequency band can be bridged. The 2.4GHz wireless connection can also be used simultaneously. Furthermore, the WDAP-C7200E adopts the high-class Qualcomm Atheros SoC (System-on-a-Chip), which provides higher stability to meet the stringent requirements of the solution.
Advanced Security and Rigorous Authentication
The WDAP-C7200E supports 128-bit WEP, WPA / WPA2, WPA-PSK and WPA2-PSK wireless encryptions, the advanced WPA2-AES mechanism and 802.1X RADIUS authentication, which can effectively prevent eavesdropping by unauthorized users or bandwidth occupied by unauthenticated wireless access. Furthermore, any users are granted or denied access to the wireless LAN network based on the ACL (Access Control List) that the administrator pre-established. For management purposes, the IEEE 802.1Q VLAN supported allows multiple VLAN tags to be mapped to multiple SSIDs to distinguish the wireless access.
Ceiling-mount Design for Your Environment
With the standard IEEE802.3at Power over Ethernet (PoE) design, the WDAP-C7200E can be easily installed in the areas where power outlets are not available. By supporting the standard IEEE 802.3at PoE PD power scheme, the WDAP-C7200E can be powered and networked by a single UTP cable, effectively eliminating the needs of dedicated electrical outlets on the ceiling and reducing the cabling cost. Furthermore, the system administrator is able to arrange the PoE schedule of the WDAP-C7200E by working with the managed PoE switch.
Easy Installation and Management
With user-friendly Web UI and step-by-step Quick Setup Wizard, the WDAP-C7200E is easy to install, even for users who never experience setting up a wireless network. Furthermore, you can simply install our software controller, PLANET SAPC (Smart AP Control), to deliver wireless profiles to multiple APs simultaneously, thus making the central management simple.
Extreme High Speed and Dual Band Make Wi-Fi Transmission More Powerful
The WDAP-C7200E delivers the Dual Band technology to avoid signal interference and ensure the best Wi-Fi performance. It allows you to check e-mails and surf the Internet via the 2.4GHz band and simultaneously watch High-Definition (HD) video or any other multimedia application via 5GHz band. Moreover, the Gigabit Ethernet port of the WDAP-C7200E offers ultra-fast wired connections that utilize the maximum wireless bandwidth; therefore, users will have real wireless speed over 100Mbps. With outstanding stability of high-speed wireless transmission, the WDAP-C7200E can provide users with excellent experience in multimedia streaming with your mobile devices anywhere, anytime.
Multiple Operation Modes for Various Applications
WDAP-C7200E supports AP, Gateway, WDS Bridge PtP, WDS Bridge PtMP and Repeater modes, through which it provides more flexibility for users when wireless network is established. Compared with general wireless access points, the WDAP-C7200E offers more powerful and flexible capability for wireless clients.
Industrial Compliant Wireless LAN and LAN
RF Interface Characteristics
Multiple Operation Modes and Wireless Features
Secure Network Connection
Easy Deployment and Management
Hardware Specifications | |
---|---|
Interfaces LAN | 2 x 10/100/1000BASE-T RJ45 port, 1 port 802.3at PoE In Auto-negotiation and Auto MDI/MDI-X |
Antennas Gain | 4 x Internal 5dBi antenna (2.4G x2, 5G x2) |
Reset Button | Reset button on the rear side (Press over 15 seconds to reset the device to factory default) |
LED Indicators | SYS, 2.4G, 5G |
Dimensions (Φ x H) | 198 x 28mm |
Weight | 498 ±5g |
Power Requirements | 48V DC IN, 0.5A, IEEE 802.3at PoE+ or 12V DC IN, 1.5A from DC Jack |
Power Consumption | < 20W |
Mounting | Ceiling Mount |
Wireless Interface Specifications | |
Standard | IEEE 802.11ac IEEE 802.11n IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11i IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3x flow control |
Media Access Control | CSMA/CA |
Data Modulation | 802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) 802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM) 802.11b: DSSS (DBPSK / DQPSK / CCK) |
Band Mode | 2.4G / 5G concurrent mode |
Frequency Range | 2.4GHz: FCC: 2.412~2.462GHz ETSI: 2.412~2.472GHz 5GHz: FCC: 5.180~5.240GHz, 5.745~5.825GHz ETSI: 5.180~5.700GHz |
Operating Channels | FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165 (9 Channels) ETSI: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140 (16 Channels) *5GHz channel list will vary in different countries according to their regulations. |
Max. Transmit Power (dBm) | FCC: up to 29 ± 1dBm ETSI: < 20dBm (EIRP) |
Receive Sensitivity | 2.4GHz: 802.11b(1Mbps):-99dBm 802.11b(11Mbps):-92dBm 802.11g(6Mbps):-95dBm 802.11g(54Mbps):-82dBm 802.11n HT20(MCS0/MCS8):-95dBm 802.11n HT20(MCS7/MCS15):-77dBm 802.11n HT40(MCS0/MCS8):-93dBm 802.11n HT40(MCS7/MCS15):-75dBm 5GHz: 802.11a(6Mbps):-92dBm 802.11a(54Mbps):-75dBm 802.11n HT20(MCS0/MCS8):-91dBm 802.11n HT20(MCS7/MCS15):-72dBm 802.11n HT40(MCS0/MCS8):-88dBm 802.11n HT40(MCS7/MCS15):-70dBm 802.11ac VHT20(MCS0):-92dBm 802.11ac VHT20(MCS8):-70dBm 802.11ac VHT40(MCS0):-89dBm 802.11ac VHT40(MCS9):-65dBm 802.11ac VHT80(MCS0):-87dBm 802.11ac VHT80(MCS9):-61dBm |
Software Features | |
LAN | Static IP Supports IP-MAC binding |
WAN | ■ Static IP ■ Dynamic IP ■ PPPoE |
Wireless Mode | ■ Access Point ■ Gateway ■ Repeater ■ WDS (PtP/PtMP) |
Channel Width | 20MHz, 40MHz, 80MHz |
Encryption Security | 64-/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X |
Wireless Security | Enable/Disable SSID Broadcast Wireless MAC address filtering User Isolation |
Max. SSIDs | 4 |
Max. Clients | 64 per radio (50 is suggested, depending on usage) |
Max. WDS Peers | 4 |
Wireless QoS | Supports Wi-Fi Multimedia (WMM) |
Wireless Advanced | WMM (Wi-Fi Multimedia): 802.11e Wireless QoS Multiple SSID: up to 4 at 2.4GHz and 5GHz, respectively Wireless Isolation: Enables to isolate each connected wireless client from communicating with each other Provides Wireless Statistics |
Wireless Advanced | Auto Channel Selection 5-level Transmit Power Control (100%, 75%, 50%, 25%, 12.5%) Client Limit Control, Coverage Threshold Wi-Fi channel analysis chart |
Status Monitoring | Device status, Wireless client List PLANET Smart Discovery DHCP client table System Log supports remote syslog server |
VLAN | IEEE 802.1Q VLAN (VID: 3~4094) SSID-to-VLAN mapping up to 4 SSIDs |
Self-healing | Supports auto reboot settings per day/hour |
Management | Remote management through PLANET DDNS/ Easy DDNS Configuration backup and restore Supports UPnP Supports IGMP Proxy Supports PPTP/L2TP/IPSec VPN Pass-through SNMP v1/v2c/v3 support, MIB I/II, Private MIB |
Central Management | Applicable controllers: WAPC-500, WAPC-1000 and Smart AP Control(SAPC) |
Environment & Certification | |
Temperature | Operating: 0 ~ 40 degrees C Storage: -40 ~ 70 degrees C |
Humidity | Operating: 10 ~ 90% (non-condensing) Storage: 5 ~ 90% (non-condensing) |
Regulatory | CE, RoHS |
Дата | Версия | Описание | Загрузка |
---|---|---|---|
2018-06-08 | 1.0 | WDAP-C7200E |
Дата | Версия | Описание | Загрузка |
---|---|---|---|
2018-01-15 | 1.0 | Initial release. |
Дата | Версия | Описание | Загрузка |
---|---|---|---|
2018-10-03 | 1.0 | Initial release. |
Информация для заказа | ||
---|---|---|
WDAP-C7200E |
1200Mbps 802.11ac Dual Band Ceiling-mount Wireless Access Point | Оформить заказ » |