New Audio Control System
PLANET VPA-100 audio control system comes with the existing IP PBX to provide unidirectional and bidirectional audio for broadcasting. An announcement can be made via the VPA-100, simply by making a call from an IP phone in the handset, headset, or hands-free mode. Its efficient 3.5-watt amplifier provides loud speaker coverage for the entire room or floor space.
The VPA-100 provides four programmable output ports to control power on or power off. It usually controls them via web. When an IP phone is dialed to the VPA-100, the user can also control these ports via keypad of the IP phone. It allows the user to control these devices anytime, anywhere.
Compliant with the Session Initiation Protocol 2.0 (RFC 3261), the VPA-100 is able to function with PLANET or any third-party SIP 2.0 compliant VoIP products.
Adjustable to Suit User's Application
The VPA-100 can be powered via a power adapter or power over Ethernet cable, meaning the user can select either of the available power sources for his convenience. The volume of output, speaker input and handset input via web UI can be adjusted to make the announcement in the environment just right. It can be set up in all facilities, such as rooms, hallways, office floors, and more.
Full VoIP Communication
Several VPA-100 units can be connected to each other over a 100-meter cabling via a PoE switch. They can also be optionally installed on walls or ceilings. If the IP PBX supports paging and intercom, one IP phone can make calls to many VPA-100 units at the same time.
Universal IP Paging System of the VPA-100
The VPA-100 registers an extension to IP PBX and into paging system. It can remotely control by turning on/off devices via IP phone or smart phone panel button. Connected loudspeaker allows any IP phone broadcast voice via the VPA-100. It also supports the handset mode for the bi-directional broadcast.
|Voice||Microphone: 3.5mm standard interface
Speaker: 3.5mm standard interface (Mono)
Loudspeaker: SPK+, SPK- (Max. 26db)
|Physical Interfaces||Two 10BASE-T RJ45 Ethernet ports
LAN1: Connects to internet and provides PoE function (IEEE 802.3af)
LAN2: Connects to other devices for network expansion
Microphone/speaker: 3.5mm connector
Terminal block for loudspeaker, power supply, ground and output ports
5VDC power supply: Max. 200mA
3.3VDC power supply: Max. 500mA
Port 1-4 output voltage/current: 3.3V/8mA
|Protocols and Standard|
|Voice Flood Control||Protocol: UDP
- G.711 A-law and μ-law
Echo cancellation noise suppression (ECN)
Adaptive jitter buffer
|Telephony Features||One voice line
Volume adjustment: output, handset input and speaker input
Audio output mode: speaker and handset
|Power Requirements||5V DC, 1A
IEEE 802.3af PoE class 3
|Operating Temperature||0 ~ 40 degrees C|
|Operating Humidity||10 ~ 95% (non-condensing)|
|Dimensions (W x D x H)||117 x 84 x 31 mm|
|Connectors||Two 10BASE-T RJ45 Ethernet ports
Two 3.5mm phone connectors
DC power jack
|2018-05-24||22.214.171.124||Added and Fixed:
1. All settings changed from the Web GUI requires rebooting the device to take effect
2. Optimized the Web GUI stability
3. Changed option name on the volume control page
4. Changed volume settings, volume could be adjusted during speaking
5. Fixed the abnormal that could happen before VPA-100 could auto answer the incoming call and the called party hangs up.
6. Adjusted SIP configuration settings, port number could be specified to the host name now
|Информация для заказа|
|SIP Public Announcement Adapter with PoE|